53
5.2.7 Service events
In this menu you can configure the internal service events generated by the device. Service events
you wish to use should be added and configured. If a service event is not added, the given event
will not be generated and the device will not send notifications related to that event. For each
service event you can add one new and one restore event, except for events for which only the
new event is interpretable. These events have a fixed event type, which you cannot change.
Available options:
Reading the settings from the device:
To read the settings from the device, click on the “
Read
” button. This will read all
settings in all menus.
Writing the settings into the device:
After changing the settings or entering new settings, in order to take effect, it is
necessary to write the new settings into the device by clicking on the “
Write
” button.
This will write the changes only, but all changes made in any menu.
Adding a new service event:
To add a new service event, click on the “
New
” button.
Creating a copy of an existing service event:
To create a copy of the selected service event, click on
the “
Clone
” button. Please
note that the new copy should have a different unique name.
Editing service event settings:
To edit the settings of the selected service event, click on the “
Edit
” button.
