41
5.2.3 Reporting channels
In this section you can configure all availabilities where reports and notifications should be sent,
such as CMS servers and receivers, user phone numbers for calls and SMS sending, and e-mail
addresses for notification by e-mail in case of using the
Pager4 PRO
model.
Available options:
Reading the settings from the device:
To read the settings from the device, click on the “
Read
” button. This will read all
settings in all menus.
Writing the settings into the device:
After changing the settings or entering new settings, in order to take effect, it is
necessary to write the new settings into the device by clicking on the “
Write
” button.
This will write the changes only, but all changes made in any menu.
Data usage calculator:
The data usage calculator shows an estimated monthly data usage based on the
configured settings and the expected number of reports and messages. For this, you
need to provide the expected number of reports and messages only.
Please note that the settings have to be written in the device in order to be applied after
a change is made. For this, click on the “Write”
button.
