32
5.2.1 General
In this section you can configure the general settings of the device.
Available options:
Reading the settings from the device:
To read the settings from the device,
click on the “
Read
” button. This will read all
settings in all menus.
Writing the settings into the device:
After changing the settings or entering new settings, in order to take effect, it is
necessary to write the new settings into the device by clickin
g on the “
Write
” button.
This will write the changes only, but all changes made in any menu.
Saving settings to file:
To save all device settings to file, click on the “
Save to file
” button.
Loading settings from file:
To load saved settings from file, c
lick on the “
Load from file
” button.
Please note that the settings have to be written in the device in order to be applied after
a change is made. For this, click on the “Write”
button.
