T. E. L. L. SOFTWARE
HUNGÁRIA KFT
12
6.1
Module status
Figure 6. Module status
The module displays the module status page after login (see Figure 6.). In the header the basic status
information is displayed:
the module’s date/time, current LAN IP address, supply voltage, the module’s remote
monitoring group ID and device ID and the simulated phone line status. In addition, if the IP Bridge has an
extension panel, the mobile internet’s IP address and signal strength in percentage are also here.
The icon next to the IP address indicates the status of the connection:
Internet connection is OK
. T
here’s a Ping server set in the Settings to verify the internet connection and
the module reaches it.
Intranet connection is OK
. T
here’s a Ping server set in the Settings to verify the
intranet and it can be
reached by the module. (This icon is displayed, even
if there’s also set a ping server
to verify the internet,
but that one c
an’t be reached by the module.
)
There’s no
Internet connection.
There’s a Ping server set in the Settings to verify the internet
connection, but the module can’t reach
it.
Network connected.
LAN cable is connected to the module, there is
an IP address, but there’s no ping
server set.
