tell ecoLINE SIA, Installation And Application Manual

Page: 9 / 12

9
4 Volume adjusting application
The volume adjusting application (Volsetter.exe) is availab
le on the manufacturer’s
website ( www.tell.hu ). You can use this software to adjust the in-call volume levels if
necessary and justified. Adjusting may be necessary if voice quality or volume problems
are experienced, caused by the circumstances in the given place of installation.
Using the software:

Open the Volsetter.exe application.

Connect the module to USB. The software connects to the module automatically,
then “
Read
” and “
Set
” buttons become available.

Read the actual settings from the module by clicking on
“
Read from module
” button.

Mic volume: microphone volume (outgoing Contact-ID).

Spk volume: speaker volume (incoming HSK/ACK signal).

Set the desired volume level, then write the settings to the module by clicking on
“
Set
” button.
Attention! Even minor level adjustment result significant changes in the in-call
volume, therefore it is recommended to make slight changes in the appropriate
direction and then check the voice quality again and test the communication!

The new settings are applied after writing, in the very next voice call.