background image

                                              

 

 

 

 

Telkom ADSL 5102G 

  

 

5

 

 

ü

 

The wizard has been included on the enclosed CD and will be 

installed on your hard drive once you insert the CD. 

ü

 

The wizard installation process is very easy and is described in 

detail below. It is recommended for novice users to not change 
any settings on the initial installer.  

ü

 

The wizard will require the .Net framework in order to function 

properly. If you do not have the framework installed on your 
computer, the initial installer will prompt you to install it from the 
enclosed CD. The framework requires approx. 25Mb of disk 
space. 

ü

 

If nothing happens when you insert the CD, refer to the 

troubleshooting section at the end of this guide. 

Installation u sing Windows XP or Windows 2000: 

 

An easy installation wizard has been developed to simplify the installation process for users 
running the newer versions of Windows. The process has been well documented and online 
help/supplementary info has been provided for each step.   
 
 
 
 
 

 
 
 

 
 
 
 
 
 
 
 

 

1.  Please insert the Telkom ADSL 5102G CD now. 

 

2.  The installer will now test whether you have the .Net framework installed. If not, you will 

be prompted to install it. See figures below and follow the onscreen instructions. If you do 
have the .Net framework installed the wizard will automatically skip to step number 3 . 

 

 

 

 

 
This step may take a few minutes. Please be patient. 
 
 

Summary of Contents for ADSL 5102G





















Reviews: