LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 120 of 273
+CSMP - Set Text Mode Parameters
Set the parameters for an outgoing message with validity period in enhanced
format: the
<vp>
string actually codes 60 seconds of validity period.
AT+CSMP=9,“023C0000000000“
OK
Set the parameters for an outgoing message with validity period in enhanced
format: the
<vp>
string actually codes 29 hours 85 minutes 30 seconds of validity
period.
AT+CSMP=9,“03925803000000“
OK
Reference
3GPP TS 27.005; 3GPP TS 03.40/23.040; 3GPP TS 03.38/23.038
+CSDH - Show Text Mode Parameters
AT+CSDH=
[<show>]
Set command controls whether detailed header information is shown in text mode
(
AT+CMGF=1
) result codes.
Parameter:
<show>
0 - do not show header values defined in commands
+CSCA
and
+CSMP
(
<sca>
,
<tosca>
,
<fo>
,
<vp>
,
<pid>
and
<dcs>
) nor
<length>
,
<toda>
or
<tooa>
in
+CMT
,
+CMGL
,
+CMGR
result codes for SMS-DELIVERs and SMS-
SUBMITs in text mode. For SMS-COMMANDs in
+CMGR
result code do not
show
<pid>
,
<mn>
,
<da>
,
<toda>
,
<length>
or
<cdata>
1 - show the values in result codes
AT+CSDH?
Read command reports the current setting in the format:
+CSDH: <show>
AT+CSDH=?
Test command reports the supported range of values for parameter
<show>
Reference
3GPP TS 27.005
+CSCB -Select Cell Broadcast Message Types
AT+CSCB=
[<mode>[,<mids>
[,<dcss>]]]
Set command selects which types of Cell Broadcast Messages are to be received by
the device.
Parameters:
<mode>
0 - the message types defined by
<mids>
and
<dcss>
are accepted (factory
default)
1 - the message types defined by
<mids>
and
<dcss>
are rejected
<mids>
- Message Identifiers, string type: all different possible combinations of the
CBM message identifiers; default is empty string (“”).
Summary of Contents for LE910-SKG
Page 1: ......
