GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0
28
2019-08-05
2.6 Serial Data Handling
The
Serial Data Handler
receives and transmits data to and from the hardware serial
controller. Data read from the serial port is passed to:
–
The command processor in command mode
–
The Tx data handler in data mode
–
The auto connection mode processor for data transfer in auto connection mode
Then Data is transferred on the serial port from:
–
The command processor in order to output responses to commands
–
The Tx data handler in order to output incoming packets
–
The Rx data handler in order to output incoming packets
–
The auto connection handler in order to output incoming data
–
The connection manager in order to output status indications
–
The wireless connection manager in order to output status indications
