GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0
119
2019-08-05
Example 1
AT+APCLIENTINFO=?
No.OfStationsConnected=1
No
MacAddr
IP
1
60:67:20:3f:10:30
192.168.44.12
OK
Example 2 - Client
assigned with the IP
statically
AT+APCLIENTINFO=?
No.OfStationsConnected=1
NO
MacAddr
IP
1
60:67:20:3f:10:e0
****
OK
5.4 WiFi Direct Mode
This section contains P2P specific commands.
5.4.1 Set Device
This command helps in configuring the P2P device attributes.
Table 96 Get Clients Information Synchronous Responses
Responses
Remarks
No. Of Stations
Connected=<NoOfClients>
<MacAddr> IP <no>
OK
Success
Limited AP mode:
MAC address and the IP of each of the client
associated to the Limited AP. The IP address will
be the one assigned to the client using DHCP.
No.Of Stations Connected=0
OK
No clients are connected.
ERROR
If mode is not set (AT+WM) to limited AP before
issuing this command.
NOTE:
In case the GS node has not issued the IP to the client, (client did not
request for IP/client assigned with the IP statically), “****” is displayed.
NOTE:
Do not issue AT+WA command when GS node is in WiFi direct (P2P)
mode. To issue AT+WA command, switch the GS node to Station mode or
Limited-AP mode using AT+WM command.
