Telit GE864 and GC864
Product Description
80273ST10008A Rev. 3 - 10/02/06
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved
page 63 of 72
6 Conformity Assessment Issues
The
Telit GE864
and
GC864
are assessed to be conform to the R&TTE Directive.
If the antenna connected to the module is conforming to the requirements specified under this
document, it requires no further evaluation under
Article 3.2
of the R&TTE Directive and do not
require further involvement of a R&TTE Directive Notified Body for the final product.
In all other cases, or if the manufacturer of the final product is in doubt then the equipment
integrating the radio module must be assessed against
Article 3.2
of the R&TTE Directive
.
In all cases assessment of the final product must be made against the Essential requirements of
the R&TTE Directive
Articles 3.1(a)
and
(b)
, safety and EMC respectively, and any relevant
Article 3.3
requirements.
The
Telit
GE864
and
GC864
are conform with the following European Union Directives:
R&TTE Directive 1999/5/EC (Radio Equipment & Telecommunications Terminal
Equipments)
Low Voltage Directive 73/23/EEC and product safety
Directive 89/336/EEC for conformity for EMC
In order to satisfy the essential requisite of the R&TTE 99/5/EC directive, the GE864 module is
compliant with the following standards:
GSM (Radio Spectrum). Standard: EN 301 511 and 3GPP 51.010-1
EMC (Electromagnetic Compatibility). Standards: EN 301 489-1 and EN 301 489-7
LVD (Low Voltage Directive) Standards: EN 60 950
In this document and the Hardware User Guide, Software User Guide all the information you may
need for developing a product meeting the R&TTE Directive is included.
Furthermore the
Telit GE864 / GC864 module
is FCC Approved as module to be installed in other
devices. This device is to be used only for fixed and mobile applications. If the final product after
integration is intended for portable use, a new application and FCC is required.
The
Telit GE864 / GC864
is conforming with the following US Directives:
−
Use of RF Spectrum. Standards: FCC 47 Part 24 (GSM 1900)
−
EMC (Electromagnetic Compatibility). Standards: FCC47 Part 15
To meet the FCC's RF exposure rules and regulations:
- The system antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all the persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
- The system antenna(s) used for this module must not exceed 3 dBi for mobile and fixed or
mobile operating configurations.
- Users and installers must be provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.
Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify
any regulatory questions and to have their complete product tested and approved for FCC
compliance.
