Telindus 1031, User And Reference Manual

Page: 48 / 394

Telindus 1031 Router Chapter 4
User manual Managing the Telindus 1031 Router
38
4.1.4 Connecting over an IP network
To established a connection between TMA and the Telindus 1031 Router over an IP network, proceed
as follows:
Step Action
1 Connect the IP network to
…
• the network port of your
PC,
• the LAN connector of the
Telindus 1031 Router.
2 Start TMA.
3 In the TMA window, either …
• select from the menu bar: Connect
→
Device…
• or press the short-cut key: Ctrl+N
• or press on the
Connect to device button:
The Connect… (to a device) window is being dis-
played as in the following figure:
4 In the Connect… (to a device) window, specify the following:
• Select the option IP address and enter the IP address of the Telindus 1031 Router.
• If a password has previously been configured in the Telindus 1031 Router then also
fill in the password field.
Before you are able to establish a connection over an IP network, you have to configure
an IP address and a default gateway in the Telindus 1031 Router.
You can do this by first connecting TMA to the Telindus 1031 Router through the control
connector, and then configuring an IP address and a default gateway. Refer to the
5.2 -
Configuring IP addresses on page 55 .
5 Click on the Next > button.
⇒
The second Connect… window is displayed.
LAN
IP