Telindus 1031, User And Reference Manual

Page: 361 / 394

Telindus 1031 Router Chapter 15
Reference manual Auto installing the Telindus 1031 Router
351
15.6.2 Creating an ASCII file using the CLI get command
To create a configuration file in ASCII (*.cli) format using the CLI get command and Telnet logging, pro-
ceed as follows:
Step Action
1 Start a Telnet session on the Telindus 1031 Router. You are automatically in CLI mode.
2 Redirect the CLI output or log it to a file.
3 Make sure you are in the top object (
telindus1031
) and in the "Edit Configuration" group.
4 Execute the
get -r
command.
5 Stop output redirection or logging.
6 In the redirected or logged file you now obtained, remove all input and output logging
before the
get -r command. Also remove the get -r command itself.
7 Now, modify the configuration file:
8 Save this file to a file with an extension *.cli .
Step Action
1 Change the string GET , now located at the beginning of the file, into
SET .
2 Type the string Load Default Configuration at the beginning of the file.
3 Type the string Activate Configuration at the end of the file.