Telindus 1031, User And Reference Manual

Page: 333 / 394

Telindus 1031 Router Chapter 12
Reference manual Performance attributes
323
12.7 Operating system performance attributes
telindus1031/operatingSystem/currUsedProcPower
This attribute displays the amount of processing power used during the last 650 milliseconds, expressed
as a percentage of the total available processing power.
telindus1031/operatingSystem/usedProcPower
This attribute lists the used processing power for the 11 most recent 30 seconds intervals. The process-
ing power is expressed as a percentage of the total processing power.
The usedProcPower table contains the following elements:
telindus1031/operatingSystem/freeDataBuffers
The processor uses buffers for storing the packets during processing and/or queuing. Each buffer has a
256 byte size, headers included. This attribute is the number of data buffers currently not in use and
available for e.g. incoming data.
telindus1031/operatingSystem/totalDataBuffers
This attribute displays the total number of available data buffers.
telindus1031/operatingSystem/largestFreeBlockSize
The processor uses RAM memory for storing internal information and buffering. The different tasks allo-
cate RAM memory on request. Tasks may also free memory again. In this way the total RAM memory
becomes fragmented. This attribute gives the size of the largest contiguous free memory block
expressed in bytes.
telindus1031/operatingSystem/freeBlockCount
This attribute displays the number of free contiguous memory blocks.
Element Description
sysUpTime
This is the elapsed time since the last cold boot. The next values are for the 30
seconds period before this relative time stamp.
min
This is the minimum percentage of processing power in use during the last 30 sec-
onds.
average
This is the average percentage of processing power in use during the last 30 sec-
onds.
max
This is the maximum percentage of processing power in use during the last 30 sec-
onds.