Local Up & Down Speaker volume
Speaker connector
Modem bridge board
RJ11-4/6 telephone lead to PTSN
LED to show line looped for audio
LED to show line looped for modem
Serial number
www.doorentry.co.uk
Terminal emulator program required
Please refer to web site for software.
Page 3 of 7
Default relay codes for slot 1:
1# or #
Pulse relay A
2#
Pulse relay B
3#
Latch relay A
4#
Latch relay B
6#
Unlatch relay A
7#
Unlatch relay B
•
Default relay times
: Default set at 1 second (minimum).
Maximum 240 seconds
• Various relay modules can be fitted in slots 1 & 2. Any
adjustments in relay times can be done with the preset
adjustment on the module locally or later adjusted over the
Phone line.
•
Default logins:
Short menu ‘
79
’ followed by serial number.
Full menu ‘
87
’ followed by serial number.
Modem short menu ‘
51
’ followed by serial number.
Modem full menu ‘
25
’ followed by serial number.
• Unit is designed to work with CPA (called party answered)
enabled. BT provide this service free of charge and is obtained by
Phoning telguard on 01306 710120. The Unit can operate
without CPA Enabled but is not advised.
• The line connected to the telguard panel should be a single
dedicated line. All additional services ie: ring back prompt, call
minder must be removed.
Dial ‘150’ for BT customer services/
Sales & billing
for this to take place.
• Telguard Power supply units must be used and should not
power any other equipment.
PC Programming
-For more information on relays please refer to web site.
...access to your home by the tone of your phone...
TM
Dedicated programming
Connector for PC via AVIT USB lead
