TG-7 Dual Path Series Installation & Operating Guide
14
56052601 Rev B © 2022 Telguard
The following items may be needed and are not included with the communicator:
•
Screws or nails for mounting the communicator enclosure and antenna to the wall
•
Solid or stranded electrical wire for connecting the STC relay outputs, trip input, or tamper to
the alarm panel. The terminal strips can accommodate solid or stranded wire from 16 to 22
gauge in size.
•
Telephone cable for panel DACT to communicator RJ-45 phone jack connection
•
CAT-5 or higher cable for premises LAN to communicator RJ-45 Ethernet jack connection
•
Conduit and connectors for protecting wiring
•
Lead acid backup battery (minimum 4Ah) when installation will use the AC power adapter
Finally, certain installation and testing tools may be needed or helpful:
•
Screwdrivers for mounting and making connections
•
Standard telephone or lineman's butt-set for verifying communication between the panel and
the communicator
•
Device that you can use to verify a working LAN port
NOTE: The communicator registration must be completed in advance to avoid installation delays
PCB Layout
D1
D2
D3
D4
D5
D6
D7
D8
RSSI
BUTTON
RESET
BUTTON
RJ-45
ETHERNET
JACK
for LAN
CONNECTION
RJ-45
DACT JACK
for PANEL
CONNECTION
EARTH
GROUND
