- Alarm clock: alarm clock settings. Set the desired time and frequency of repeat.
- Find Watch: Select a feature to find your device if it's near you. The watch will ring to inform you of its
location.
- Notifications: This is where you get and preview any notifications and alarms you receive from the watch.
- Remote camera: take a photo using the watch camera and receive it on your phone. The captured image
appears after a certain waiting time, depending on the signal strength of the cellular network.
- My profile:
• Personal data: Your account settings
• Device list: Add, edit or remove a connected devices
• Change Password: Change the password for your account.
Settings:
• SOS numbers: when the watch user presses and holds the SOS button, the watch makes an automatic
emergency call to three contacts defined on list.
• Voice monitoring: enter the phone number to be called from the watch in order to listen to its surroundings.
Pick up the call and check what's happening nearby. The user of the watch has no notification that such a call
has been made.
• Do not disturb: Select the time during the day when the user of the watch will not receive phone calls.
• Location mode: select normal mode according to your needs.
• SMS notifications: enter the number to which you want to receive SMS notifications about events such as: low
battery level in the watch, triggering the SOS alarm using the watch button.
• Phone book: Define up to ten contacts that the watch user will have in the phone book.
• Time zone: set your time zone than the device shows the correct date and time on.
• Language: Choose language for your device from the available.
• Settings switch: Enable or disable the watch function.
• LBS Location: Enable or disable location using network operators antennas.
• Turn off watch remotely: watch will be turned off.
9. Pytania problemy i rozwiązania
9.1 The application does not receive commands and shows information that the watch is disconnected from the
network
– Check whether GMS signal is correct– whether the range columns are available / visible on the display. - - - If
they are crossed out, please turn off your watch.
Check if the SIM card is properly installed in the watch, if it supports 2G internet and if there is an internet data
package available.
Turn on the device. If the range columns are still crossed out, go to the next point.
- Check if there are data transfer arrows, if not, set APN (Access Point Name - specific packet network, e.g.
internet):
Please send a text message to the number of the watch with the content: pw,123456,apn,internet,,,XXXXX#
* the X character stands for digits assigned to a specific operator
