2 3
TO ADDITIONAL
INTERCOM STATIONS
CH 1
CH 2
PS-L
PS-L
4
PS-L
PS-L
4
SPK-2000
US2000A
EGM MIC
BACK VIEW FOR DAISY-CHAIN CONNECTION
FROM PREVIOUS
INTERCOM STATION
BACK VIEW FOR HOME-RUN CONNECTION
CH 2
CH 1
SPK-2000
1
1
CH 1
CH 2
RMK-S
RACK MOUNT
RMK-D
RACK MOUNT
FRONT VIEW
TYPICAL RACK-MOUNT SETUP
1
1
4
4
FROM TW-7W SPLITTERS
LOCATED NEAR SYSTEM
POWER SUPPLY
1
1
NO CONNECTION
PS-L
(OPTIONAL)
PS-L
(OPTIONAL)
Figure 12. Typical Remote Binaural Speaker Station. This example is similar to
the one on the previous page, except that each channel is heard in a separate
speaker. Make sure the internal DIP switches are set for binaural speaker operation
as described on page
. As in the previous example, a PS-L local power supply is
required for each SPK-2000 speaker, but is optional for the US2000A.
Note: For further infor-
mation about the cable
numbers, see page
