Assembly | en
35
Bosch Security Systems, LLC
Customer Maintenance Manual
2020-07 | 01 | F.01U.387.060
7.3
Attach the prefilter
To
attach the prefilter
, do the following
4
Carefully clip the
prefilter
to the mic.
7.4
Replace the yoke assembly on the headband assembly
To
replace the yoke assembly on the headband assembly
, do the following:
1.
Slide the
yoke assembly
onto the headband.
2.
Place the
glider stop
in the appropriate hole on the glider.
3.
Swivel the
spacer
in line with the glider.
4.
Click the
bottom edge of the black plastic spacer
into the retaining hole.
