Assembly | en
29
Bosch Security Systems, LLC
Customer Maintenance Manual
2020-07 | 01 | F.01U.387.060
7
Assembly
7.1
Boom side assembly
To
assemble the boom side assembly
, do the following:
1.
Solder the
overhead cord
to the PCBA.
J11
Red
J12
Blue
J9
White
J10
Shield
J17
Black
2.
Solder the
cable assembly
to the PCBA.
3.
Thread the
boom mic wires
through the center hole.
4.
Using the two shorter screws, attach the
PCBA
to the boom mic assembly.
5.
Solder the
boom mic wires to the PCBA
.
Notice!
Use shield as an anchor point so there is slack on smaller wires.
J7
Red
J8
Green
J18
Sheild
