Telex Airman 8, Maintenance & Overhaul Manual

Page: 30 / 52

30 Parts List and Disassembly/Assembly Airman 8
2. Ensure the cover fully encloses around the headband at both sides .
2.3.2.5 Replace the Yoke Assembly from the Headband Assembly
To replace the yoke assembly on the headband assembly , do the following:
1. Slide the yoke assembly onto the headband.
2. Place the glider stop in the appropriate hole on the glider.
3. Swivel the spacer in line with the glider, and then click the bottom edge of the black
plastic spacer into the retaining hole.