SOFTWARE CONFIGURATION
Before connecting the Plixus Gateway to other devices, it is necessary to verify a few information in the
software of your Central Unit.
Open your browser and enter the IP address of your Central Unit in the address bar (by default:
192.168.0.100). If you are connected to the Internet, the Confero Cloud platform opens. Log in as
Technician
.
Version Of The Central Unit
The version of the Central Unit must be 7.2 or higher. To check the version of your Plixus AE-R, Plixus
MME or Confidea WAP G4 device, process as follows:
1. Click on the
Device
icon
in the left bar menu. You will get an overview of all the devices
of your installation where you can see the version of the central unit:
SOFTWARE CONFIGURATION
30
