Televic PLIXUS, Installation Manual, Page: 28 / 51

CHROME
Although not every option has been tested, versions 80 and higher have full support for
authentication
We've found a forwarding proxy setup with Kerberos does not work
Whitelisting A Domain In Your Web Browser
In case your browser is blocking the access to the Confero Cloud platform when starting the
configuration of the Plixus Gateway, you can change the permission settings of the browser and whitelist
the domains mentioned in the previous section.
To know how to whitelist a domain in Google Chrome, click on the following link and follow the steps:
https://support.google.com/chrome/answer/114662.
For Microsoft Edge, go to https://support.microsoft.com/en-us/microsoft-edge/change-site-access-
permissions-for-extensions-in-microsoft-edge-7d1c889d-e267-4be0-15d4-3ed5d0c82ef5 .
Fixed IP Address
As mentioned in the Before Installation section, the Plixus AE-R, Plixus MME or Confidea WAP G4 Central
Unit must have a fixed IP address to be able to configure the Plixus Gateway.
The IP of the Central Unit can be achieved through DHCP. In that case, the IP should be fixed in
the DHCP server. If the engine is in DHCP mode, always make sure that the IP address is always
the same.
IT CONSIDERATIONS 28