manualshive.com logo in svg

Televes 596101, User Manual

Share
Download
Televes 596101 User Manual Download Page 40

MOSAIQ6 Multi-touch Meter/Analyser

40

  Goto: recovers one of the 8 positions 

for the antenna that has been previously 

stored

 -

SCR (only satellite band): Selects the SCR 

parameters (multiswitch, standard and 

slots) When a slot is enabled (for example 

slot 3, freq. 1210MHz), the meter will tune 

into the  slot frequency (1210MHz) and 

will set the slot with the meter parameters: 

frequency, band (powering), and DiSEqC. 

In addition, a SCR icon will be shown in the 

bar at the top (SCR3) to indicate that the 

slot is enabled. While the slot is enabled, 

all the setting changes of the meter, will 

be applied to the currently slot (SCR3).

6.4.10.-IP Analysis (Ethernet Input)

This function makes a deep analysis of the IP signal, 

and shows the parameters of the signal and all the  

corresponding measures, as well as a chart that 

represents a history of the measurements in a 

period of time selected by the user.

6.4.10.1.- Main window

IP channel parameters

IP measurements

History of the measurements during an interval 

selected by the user. Drag to move the blue mark

6.4.10.2.- Options context menu

• 

• Clear: clears the graph.
• Last: 10 min, ½ hour, 1hour, ½ day, 1 day, 1 week. 
Allows select the time interval shown in the graph.

Summary of Contents for 596101


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands