MOSAIQ6 Multi-touch Meter/Analyser
16
Menus
The MOSAIQ6 has 3 different menus. These menus
will be explained in this section briefly, as well as
their locations. All their features will be explained
in the sections below.
Top Menu
To access this menu you must do a short swipe in
the top central part of the screen.
The features of this menu allows us to set up
certain aspects of the meter in a fast way and from
any feature.
Main Menu
To access this menu you must do a short swipe in
the right central part of the screen.
The main menu is wheel with all the features of
the meter.
Doing long swipe on the wheel, the user can access
every features. To select a feature, you must tap on
the corresponding icon.
Options context menu
Most of the features of the main menu have a menu
with some options that pertain exclusively to that
feature. These options are in a context menu that
appears when the user does short swipe in the left
central part of the screen.
Top menu
This menu has several tabs that will be explained
below. To select one of them, the user must tap on
the title.
Inputs/Outputs:
Doing tap on the connector draw, the
corresponding input/output will be enabled/
disabled. Once it is enabled, the user must set
some options depending on the kind of input.
If you select CAM input, please wait a few seconds
until the MOSAIQ6 detects the CAM. Then you can
access to the MMI menu of the CAM:
Inputs are green and
outputs are blue
Select the setup options
doing “tap”
Enabled input
Tap to access to the MMI Menu
