manualshive.com logo in svg

Televes 593980, Manual, Page: 20 / 31

Share
Download
Televes 593980 Manual Download Page 20

H30+ H30D+ - CATV & DOCSIS 3.1 Meter /Analyzer

20

         - 

Volume

         - 

Info Service

: On/Off info about the Service.

   12. LT Monitoring  

 

 

            

The 

H30+/D+/D+Adv

’s Long Term Monitoring 

feature allows automatic monitoring of the 

selected channel. The user must select the time 

interval elapsed between two consecutive 

measurements shots. The 

H30+/D+/D+Adv

 

automatically performs all the measurements on 

the selected channel and saves them in memory.
Once you enter the function, you must press the 

OK

 

button to start measuring. The 

H30+/D+/D+Adv

 

will measure and store all the measurements while 

the user does not leave the function.

12.1. Main window

Below is a capture of a LT Monitoring window with 

a brief explanation of its features:

Graph 

showing the last 

264 measurements, with 

color according to pass/

fail indicators.

Last 

measurements.

Selected channel

Change using 

   11. MPEG    

The 

H30+/D+/D+Adv

’s MPEG feature will show 

the image of the selected service.

11.1. Main window

Below is a capture of a MPEG Info window with a

brief explanation of its features:

Press OK button to see 

the services list

Selected channel

 Change using 

11.2. Setup

Press 

 to change the Channel info options.

         - 

Ter. Plan

: Selected Terrestrial plan.

Summary of Contents for 593980
































Reviews:

No comments