XI-1500 AP Outdoor Antenna Configuration
Elaborated by TII
Page 1 of 2
Date 6/13/2002
TELETRONICS
INTERNATIONAL, INC.
XI-1500 AP OUTDOOR ANTENNA CONFIGURATION
The XI-1500 AP can be use for outdoor enviroments connecting the RF cable to only
one of the antenna connector and configuring the AP unit to transmite and receive only
through it. We recommend use antenna b_only as follow:
1. Use telnet conection to the AP unit. (i.e.: c:\> telnet 192.168.1.1 and press ENTER).
2. Then type your password:
Access Point Console
--------------------
Version 2.9.2
Password: **** , and press ENTER
3. Use the set command to view your current antenna mode:
AP292> set , and press ENTER, you should see...
Parameter Name Current Value New Value Execute
----------------------------------------------------------------------
[ General ]
apname AP292 Save
web_port 80 Save
telnet_port 23 Save
[ IEEE802.11 ]
mode ap Reset
essid 11MAP Reset
channel 9 Reset
tx_rate 11 Reset
tx_retry 7 Reset
antenna diversity Reset
ß
rts_threshold 2432 Reset
frag_threshold 2346 Reset
[ IP Addresses ]
ip_address 192.168.1.10 Reset
ip_netmask 255.255.255.0 Reset
ip_gateway 192.168.1.1 Reset
----------------------------------------------------------------------
