Teletrac CTO7, Installation Manual

Page: 18 / 20

Volvo ISX Series- CTO and FIL Location
The CTO7 is installed on the blank panel, just
below the passenger’s side cupholder.
Please ensure that the CTO7 is installed just
low enough that it can be tilted forwards for
fusebox access. The FIL is installed into one of
the blank knock-outs, just above the radio
and to the left of the CTO7. A small relief
notch is required to be filed into the dash
panel to allow passage of the CTO7 data
cable, as shown at bottom right. Please
ensure that adequate cable slack is provided
so that the driver may adjust the CTO7 as
needed.
Note: Please refer to the CTO7 mounting and
provisioning instructions for direction as to
how to mount and test the device’s
functionality. The CTO7 must be fully tested
prior to calling for verification.