15
/
33
Figure 10. Pins for programing device
But the first thing to do when it comes to hardware preparation of the device is to
assemble the antenna on the device.
SOFTWARE PREPARATION
The main reference in this chapter will be to create and adjust a test project that uses
the library and a few basic files that accompany the library. The project will not have any
particular functionality, the basis is to prepare the project until the first successful building.
It will be assumed that the user is familiar with embedded programming, and knows
how to work with sensors and use Atollic TrueSTUDIO as a development environment for
programming.
First, a test project will be created by clicking on File/New/C Project. Instruction must
be followed on Figures.
GND
SW CLK
SW DIO
3,3V
