14
/
33
TELETHINGS LORA NODE AS PROGRAMMABLE DEVICE WITH
DAUGHTER BOARD
INSTALATION HARDWARE AND SOFTWARE
INTRODUCTION
The Telethings LoRa Node in the function of the programmable device implies a
module that is factory-loaded on the development board, i.e. the so-called daughter board. As
the name itself says, the module as such is subject to programming of the functionality as
desired by the client. This package also includes a library for programming the
aforementioned. The shape of the development board is adapted for connecting the sensors,
for which the connectors are provided. There are 8 pins left for programming their
functionality. UART, I2C, ADC, GPIO are interfaces at which the user can count.
HARDWARE PREPARATION
For programming the device, STM microcontroller programming tool is needed, and
the example of this tool is ST Link V2.
Figure 9. ST Link V2
Pins for programming the device have been designed on the development board as
shown in the illustration.
