Telestream PRISM MPI2-10, User Manual, Page: 30 / 302

Getting Started
MPI2-10 Power-on and Power-off Procedures
PRISM MPI2-10-MPX2-10 User Manual
32
MPI2-10 Power-on and Power-off Procedures
This section describes how to apply power to the MPI2-10 monitor and how to power-
on and power-off the instrument.
MPI2-10 Power Cord Installation
This instrument is powered by an AC power source. Connect the power cord to the
power connector on the rear panel of the instrument.
The power connector is keyed to be directional, with the flat portion of the power cord
housing facing the left of the instrument (as viewed from the rear). When fully inserted,
the power cord housing latches onto the instrument power connector.
Caution: To minimize the risk of damage to the instrument, we strongly
recommend the power cord be connected to the instrument before the power
cord is connected to the AC power source.