Telestream PRISM MPI2-10, User Manual

Page: 257 / 302

Application Information
Jitter Application
259
PRISM MPI2-10-MPX2-10 User Manual
Jitter Application
The Jitter Display application shows the wave shape of the jitter and allows you to view
additional time-domain information, such as whether there are jitter components that
are synchronous or nearly synchronous to the video line or frame.
Note:
This application requires hardware option PHY and software Option MP2-FMT-
4K to enable 12G-SDI. This application is only valid on SDI 1.
Jitter Display Settings Menu
Open the Jitter Display Settings menu:
1.
Select the
Tiles
icon ( ).
2. Select the tile with the Jitter Display application.
3.
Select the
Tile
icon ( ).
Note:
The Move icon ( ) is in the settings menu header. Select this icon to move the
settings left of right.