Telestream PRISM MPI, User Manual

Page: 131 / 304

Configure the Instrument
Set Time and Date
131
PRISM MPI-MPX User Manual
Set Time and Date
To set the internal time and date used by the instrument to record events.
Note:
When the time and date settings are changed, the instrument must be
rebooted to implement the changes.
1. Select the Settings icon ( ) to open the Settings menu.
2.
Select
Utilities
to open the Utilities submenu.
3. Select Time and Date to open the submenu. The submenu has two tabs: TIME
ZONE and TIME AND DATE.
Caution: Excess time changes can cause the loss of all license files. If the
instrument license files are lost, servicing is required. Time should be changed
less than ± 1 hour. Use the TIME ZONE tab to set the local time.
4.
Select
TIME ZONE
to open the submenu.
5.
Select the Time Zone drop-down list to select the correct time zone offset for your
location. The selection names include the time offset from UTC and major cities in
those time zones.
6. Select TIME AND DATE to open the submenu.