Configuring the Lightspeed Live Capture Server and Apps
Changing a Source Name
54
Lightspeed Live Capture User Guide
Changing a Source Name
The default names for SDI ports has this form: “SDI Input [1 through n]”, where ‘n’ is 4 or
8 depending on which Lightspeed Live server you have. To rename a source, follow the
procedures below and observe these renaming rules:
•
The Source Manager can be used to change the input source's name. After chang-
ing a source name you must edit affected Capture actions and select the renamed
source. You can determine which workflows use a particular input source by using
Find Workflows...
from the Capture Inventory panel in the Vantage Management
Console.
•
Each source must be named uniquely.
•
None of these characters can be used in the source name: ` * | \ : ; " ' < > ? /
