Appendix D: Live Capture Classic Web Application
Using the Live Capture Classic Web App
348
Lightspeed Live Capture User Guide
Schedule and Web Service Controls and Indicators
When the Capture action Trigger option is set either to
Schedule
or
Web Service
mode
the Channel Control dialog provides display of the video source and information about
the present operating state of the selected channel. See for more information on
setting the Trigger option.
Channels configured for Schedule or Web Service are presented in the Live Capture
Classic web app as read-only status views, and are controlled by the Schedule settings,
or by the Web API commands. See
Live Capture Web API Reference
on the Telestream web site.
Due to the unique nature of a Schedule or Web Service trigger, more than one job may
be queued up for processing. The status information displayed for these triggers will
vary depending on whether a single job is queued or multiple jobs are queued.
DAI, Recurring Segment Triggers are Not Supported
The DAI and Recurring Segment triggers are not supported in the Live Capture Classic
web application. They are named “Schedule”. They are in a read-only status mode, with
limited information available.
When a Single Event is Queued for Capture
The information shown in the following image is available when there is just one
Schedule or Web Service job in the Capture queue. See the previous sections for
detailed descriptions of the information that is displayed.
Video View Panel
Close the Dialog
Source Name and Input ID
Timecode
Audio Level Meters
Video Information
Present Capture
State
Elapsed Time of Recording
Pending Capture State
Workflow Name
