Introducing Lightspeed Live Stream and Capture
Lightspeed Live Server Hardware Specifications and Components
32
Lightspeed Live Capture User Guide
Front Panel
The Lightspeed Live server has a removable front bezel. By removing the bezel, you can
access the system interface buttons and LEDs, drives, and 2 front USB ports.
Front Panel Features
The removable front bezel provides visibility of the system monitoring LED indicators
and allows pinhole access to the recessed UID and power buttons.
Lightspeed Live Server Front Bezel:
LEDs (left to right)
•
System Overheat | FAN Fail | UID
•
Network Activity (NIC1)
•
Network Activity (NIC2)
•
Hard Drive Activity
•
Power
UID Button (left)
The UID button alternately turns on and off the blue front and rear panel UID LEDs used
to locate a particular unit among many units in a rack or server room.
Power On/Off Button (right)
Press the Power On/Off button to perform a normal power up/power down cycle or a
hardware reboot (hold the button down for 4 seconds). A reboot abnormally
terminates connected clients and systems and should be done only in the event of an
unrecoverable system error. Under normal conditions, you should properly close client
programs and shut down the domain and OS before cycling power.
USB Ports
Two USB 3.0 ports for general use are located below the LEDs and buttons.
Lightspeed Live
LEDs
On/Off Button
2 USB 3.0
SSD/SATA OS Drive
4 Included RAID 5
SAS Drives
4 RAID 5 SAS
Available Drive Bays
Available SSD or
SATA Drive Bay
UID Button
