Appendix B: Containers, Codecs, and Vantage Actions
Secondary Output - Video Codecs
304
Lightspeed Live Capture User Guide
Channel Map
Allows re-mapping of the incoming source audio channels to the captured file output
channels. Channels are numbered from 1 to 32. Specify the number of the audio input
channel to use for each output channel.
Secondary Output - Video Codecs
The following Secondary Output video codecs are available when configuring the
Capture or Tape actions.
AVC
Supported Container
- Proxy MXF OP1a RDD25
- Proxy MP4
- Proxy TIFO
Same as Source
When enabled, the width and height of the source is passed through. Width and Height
parameters set in the action for the AVC codec are ignored.
CAUTION:
Same as Source
cannot
be used when UHD/4K is set as the primary
output.
Width
- Between 320 and 720
Height
- Between 240 and 480
Bit Rate (in kbps)
- Between 512 and 10,000
Secondary Output - Audio Codecs
The following Secondary Output audio codecs are available when configuring the
Capture or Tape actions.
AAC
Supported Container
- Proxy MXF OP1a RDD25
