Creating Capture & Tape Action Workflows
Creating and Activating the Capture Action Workflow
102
Lightspeed Live Capture User Guide
Program
The Program panel displays the input selections and controls.
Source
. Select the input source to use. Capture sources are defined in the Vantage
Management Console > Capture Inventory.
When Live Stream and Capture are Used on the Same Server
The following warning only applies when Live Stream and Live Capture are used on the
same Lightspeed Live server:
Note:
If your server is configured with both Capture and Lightspeed Live Stream, the
File Loop and Slate sources may display in the Source menu. These are NOT supported
for use by Capture workflows and are reserved for Lightspeed Live Stream. The actual
name of the sources created in Live Stream may be altered by the user, and may not be
called File Loop, etc. Please consult the Lightspeed Live Stream User Guide for
additional details.
Channel Group
. Select the Channel Group in which you want this workflow to reside.
Leader, Filler, and Trailer Requirements
All Leader, Filler, and Trailer files must meet these requirements:
- QuickTime wrapped MOV ProRes format.
- One stereo audio track containing two channels of PCM audio.
- The frame size and frame rate must match the input source it is used with.
