TELES VoIPBox BRI, Reference Manual

Page: 78 / 280

4 Configuration files
VoIPBox BRI Version 18.0.002 Page 78
4.2.1.6 Global Settings
This category contains the following system parameters:
Table 4.16
pabx.cfg
: global settings (page 1 of 4)
System Parameters
VoipGlobalMaxChan=<count>
Max. number of channels for the entire system.
VoipMaxChanOut=<count>
Limits outgoing calls through this profile. You have to define the number of VoIP chan-
nels to be used.
VoipSuppressRtcp=<mode>
Suppresses (Yes) or allows (No) the sending of RTCP packets.
VoipAnnounce=<filename>,NOCONN FAKEALERT
Only for outgoing calls which are sent through the VoIP profile where this parameter
is included.
VoipAnnounce
defines an audio file which is played to the caller. The entire file is
played, even if the called person picks up the call before the end of the announce-
ment. Enter a comma after the filename to mark the end of the file.
In the default setting, a connect is sent to the caller straight away so that the caller can
hear the announcement.
Set the option
NOCONN
to suppress this connect.
Set the option FAKEALERT to play a ringtone after the announcement.
VoipStopAnnounceOnConnect=<mode>
If
Yes
is set and the call changes to the state CONNECTED, the announcement config-
ured with VoipAnnounce is stopped.
VoipStopAnnounceOnAlert=<mode>
If
Yes
is set and the call changes to the state ALERTING, the announcement configured
with VoipAnnounce is stopped.
VoipFaxVolume=<volume>
Defines the volume of fax and CID tones.
Range: 0 (-21 dB) to 15 (-6 dB)
Default: 9 (-12 db)
VoipCEDTransferMode=<int>
Defines whether CED (a tone initially sent by a fax device) is sent via T.38 or RTP:
0 = T.38 (default)
1 = RTP
VoipCngRelayEnable=<int>
Defines whether CNG (a tone initially sent by a fax device) is transmitted by means of
T.38 or RTP:
0 = RTP (default)
1 = T.38
VoipSendUpdate=<mode>
Allows (
Yes
) sending of UPDATE messages or not (
No
).
Yes
is the default value.