TELES VoIP Box BRI Series, Reference Manual

Page: 84 / 226

4 Configuration files
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 84
4.3.4 Registrar Profiles
Registrar profiles are used to register the VoIPBox with a SIP
registrar. It is possible to configure different registrars for dif-
ferent destinations and to define backup registrars. These
registrar profiles are then assigned to the VoIP profiles:
GkPwd=<name>
Password to log onto the gatekeeper. If you do not use authentication, leave this entry
blank.
GkAdd=<ip addr>
The gatekeeper’s IP address.
GkTtl=<sec>
Gatekeeper time to live (default 0 means infinite).
GkMaxChan=<count>
Max. number of channels used for this gatekeeper. If this parameter is not defined
(default), there will be no limit.
GkUseStun=<mode>
Enter
yes
(default) to use the STUN values for the GK profile.
GkTerminalAliasWithPrefix=<mode>
Some gatekeepers may require that prefixes are listed in the Terminal Alias section.
Enter
Yes
to activate this function; default value is
No
).
GkTerminalTypeWithPrefix=<mode>
Enter
No
to deactivate sending the Dialed Prefix Information in the Registration Re-
quest (default
Yes
).
GkDynRai=<mode>
When yes is entered, the GK receives an RAI (resource availability indication) when a
status change occurs on the available mobile channels. When no is entered, the RAI is
sent with each ARQ (admission request) and DRQ (disengaged request). Default is no.
GkNoResourceAvailableIndication=<mode>
With this parameter the <system> will not send RAI indications to the Gatekeeper. De-
fault No.
Table 4.19
route.cfg
: Gatekeeper Parameters (continued)
Gatekeeper Parameters
Table 4.20
route.cfg
: Registrar Parameters
Registrar Parameters
[Registrar=<name>]
The name of the registrar profile.
RegId=<name or ip addr>
Host name or IP address used in the register’s request header. Bear in mind that the
DNS service must be active if you enter the host name.