TELES VoIP Box BRI Series, Reference Manual

Page: 115 / 226

6 Signaling and routing features
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 115
This chapter contains some special configuration examples
for different call routing and configuration cases.
6.1 Digit collection (enblock/overlap re-
ceiving)
This function makes it possible to collect up to 58 digits and
transmit calls when a specific number of digits has been di-
aled. The entire call number is required for the call to be set
up with a mobile phone or the mobile gateway. Since most
numbers have a uniform number of digits, the mobile gate-
way can collect digits when calls enter the gateway in overlap
mode. Digit collection occurs through the following mapping
command:
The | (pipe) signifies that the following digits will be collected
before they are transmitted, and <digits> is the total number
of the port digits and the digits of the called party number.
This figure can range between 00 and 58 and must be entered
in double digits. The parameter
DTMFWaitDial
defines the
number of seconds the system waits between the individual
digits (default 5). The call will be forwarded as soon as the
specified number of digits has been dialed or a time-out limit
has been reached.
MapAll<direct>=|<num><<<digits>