TELES VoIP Box BRI Series, Reference Manual

Page: 112 / 226

5 Additional VoIP parameters
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 112
5.11 Announcements
An announcement can be played immediately after the con-
nection has been established. The announcement’s file for-
mat must be G.711. A converter tool to convert wave files to
the G.711 format is available from TELES free of charge. It is
included with the The announcement is defined in the
Sub-
scriber
line using the following entry in the
pabx.cfg
file:
<sec>
refers to the maximum number of seconds after which
the connection to the DTMF controller is teared down.
The entry
<dir>
refers to the directory in which the announce-
ment file is saved. The directory name must be
boot
. The file
extension must be 711.
The
Subscriber
line can be extended to contain up to 26 ad-
ditional announcement files:
A mapping needs to be added to the
route.cfg
file for every
announcement to map to the port that is necessary for recog-
nizing DTMF tones:
DTMF[<sec>,/<dir>/<file>]
Please enter a time that is longer than the announcement
time.
!
DTMF[<sec>,/<dir>/<defaultfile>,/<dir>/<file_a>,/<dir>/<file_b>,...,/<dir>/<file_z>]
MapAll<number>=<DTMFport>DTMF # (for the default announcement file)
MapAll<number>=<DTMFport>DTMFa # (for file_a)
...
MapAll<number>=<DTMFport>DTMFz # (for file_z)