Blocks
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
Page 29
4.7 Blocks
4.7.1 Block against Incoming Calls
The block against incoming calls is also known as
‘do-not-disturb’
. The termi-
nal device, for which such a block is active, cannot be called any more. Make
use of this function when you do not want to be interrupted by calls. You can
block any of the TELES.iPBX 8TR Box’s ports individually against incoming
calls.
Activate the block against incoming calls:
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
191
Enter the digits 191.
Ν
Select the port number.
#
Press the pound key. Listen for the confirmation tone.
Example:
Block port 13 against incoming calls:
∗
(
Π
)191
13
#
Lift the block again:
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
190
Enter the digits 190.
Ν
Select the port number for which you would like to lift the block.
#
Press the pound key. Listen for the confirmation tone.
Example:
Free port 13 for incoming calls:
∗
(
Π
)190
13
#
Note:
By setting call forwarding I, (unconditional) blocks against in-
coming calls are lifted.
