Call Forwarding
4.5.3 Call Forwarding III (on busy) by Box for Current Port
The call is forwarded when the called party is
busy
.
Υ
Lift the telephone receiver
at the port for which call forwarding
should be valid
. You hear the dial tone.
∗
Press the star key.
43
Enter the digits 43.
Ν
Enter the call number for the call forwarding destination as you
would when dialing from the box – this means beginning
with
outside line access
for numbers in the public net.
#
Press the pound key.
Example:
Set a call forwarding III (on busy) to port 13.
∗
43
13
#
Note:
Call waiting (section 5.6) and call forwarding on busy should
not be set simultaneously. When both functions are active si-
multaneously, you will hear call waiting when a second call ar-
rives. When a third call arrives, it will it be transferred. Switch
call waiting off therefore before activating call forwarding III.
Delete:
In order to delete call forwarding enter the same key combina-
tion without destination call number.
4.5.4 Call Forwarding II + III (no reply/on busy) for Current
Port
You can switch both call forwardings (II and III) together for an extension. The
incoming call is forwarded either if it is not accepted within
20 seconds
or
if the
port is
busy
.
Activate call forwarding II and the call forwarding III after each other for the
appropriate port (section 4.5.2 and section 4.5.3).
Page 24
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
