![TELES ECOTEL Manual Download Page 64](http://html1.mh-extra.com/html/teles/ecotel/ecotel_manual_1082146064.webp)
C O N F I G U R A T I O N F I L E S
C H A P T E R 5
64
ECOTEL 3G 16.1. Revised: 1 March 2011.
Example:
The following example is for an ECOTEL with BRI extension.
Additional parameters for mobile controllers are described in Table 5.16 and Table 5.17. The parameters listed in
Table 5.16 are required for mobile controllers and those listed in Table 5.17 are optional, depending on the imple-
mentation scenario.
Required Mobile Parameters
Specific settings for each mobile interface appear in square brackets behind the keyword
UMTS
. These parameters
are separated with a comma.
The following parameters are required:
Subscriber00 = TRANSPARENT ROUTER ALARM NODE[0000]
Subscriber01 = TRANSPARENT ROUTER ALARM NODE[0001]
Subscriber02 = TRANSPARENT ROUTER UMTS[0000,00000,+000000,1,1,1,SIM4] ALARM NEXT
Subscriber03 = TRANSPARENT ROUTER UMTS[0000,00000,+000000,1,1,1,SIM4] ALARM
Subscriber04 = TRANSPARENT ROUTER SWITCH CHMAX[8]ALARM
Table 5.16
Required Mobile Parameters in
pabx.cfg
Subscriber<port>=<type>
[<pin>,<lain>,<SMSC>,<sim>,<loudGSM>,<loudPCM>,SIM<x>,...]
<port>
Defines the running (physical) port number.
<type>
Defines the module as UMTS.
<pin>
Defines the SIM card’s PIN. The PIN is always four digits. If no PIN is defined for a SIM
card, the PIN 0000 must be used.
NOTE: An error message appears in the
protocol.log
file when a PIN is incorrectly
configured.
<lain>
Defines the LAIN (
L
ocal
A
rea
I
dentification
N
umber) – the mobile network to be used.
This prevents roaming into another mobile network. The LAIN is always five digits. If the
LAIN is set at 00000, roaming will not be prevented. The LAIN configuration prevents
accidental logon of the SIM card with another network and the use of false SIM cards.
<SMSC>
Defines the SMS center’s access number. The number must always begin with + and the
country code.
<sim>
Defines the SIM card to be used. Only the default value 1 is possible. Activate configu-
ration suffices to activate changes.
NOTE: Please see the example following Table 5.17 for information on numbering SIM
cards.