E C O T E L I N S T A L L A T I O N
C H A P T E R 4
32
ECOTEL 3G 16.1. Revised: 1 March 2011.
4 . 8 . 3 S T A R T U P V I A G U I
Figure 4.7
GUI
System configuration can occur via the GUI. We recommend you use Internet Explorer 6/7. Simply open a browser,
enter the system’s IP address in the address bar, and click
Login
in the navigation menu on the left. Enter the
username
teles-carrier
and the password
tcs-carrier
to access the system.
Using the navigation menu on the left, click
Faststart
to configure the system. Follow the steps as they appear.
4 . 9 S T A R T U P V I A F T P
If you are using a computer that does not use a Windows operating system, you can preconfigure the system via
FTP. The system’s default IP address is 192.168.1.2. To configure the system using FTP, you must assign your com-
puter an IP address from network range 192.168.1.0 Class C and then access the system via FTP.
The default user is
teles
and the default password is
tcs-ag
. To configure the system, use the default config-
uration file example on the CD for your device in the
Configfiles
directory and the following subdirectories:
ip.cfg
This subdirectory contains the file (
ip.cfg
) responsible for configuration of the Ethernet interface.
pabx.cfg
This subdirectory contains the file (
pabx.cfg
) responsible for the port configuration.
route.cfg
This subdirectory contains the file (route.cfg) responsible for the routing configuration.
To edit the default configuration, follow the directions in Chapter 5.2.1.4
. Upload the configuration files into
the
/boot
directory.
