7. Using the modem
7.1 Setting up the modem
To set up the modem, do the following steps:
Eject the SIM card holder using the yellow button and pull out the drawer.
Insert your SIM card into the drawer.
Make sure the SIM card fits into the drawer properly.
Insert the drawer into the modem. Connect the antenna to the SMA connector
Optionally, the modem can be connected using the RS-232 interface
Plug the power supply cable to the power supply input
Now the modem is ready to work.
7.2 Mounting
the
modem on the wall
To mount the modem on the wall, install the wall mounting bracket as shown below:
15
Summary of Contents for RB600
Page 1: ...1 ...
Page 5: ...2 References 1 Quectel_MC60_Series_AT_Commands_Manual_V1 0 5 ...
Page 33: ...33 ...