blue PiraT2 / 5E / 5E
User Guide
Datum: 21.09.2016
Seite 14 von 71
blue_PiraT2_UserManual_V2.4.1.doc
LED
Behavior
Active
on as long as the data logger is operating
Memory
active, if the data logger is not in the ring buffer mode
blinking, if the storage capability exceeds 75 %
continuous on, if the storage capability is used by 100 %
Error
on, if an error which has occurred is still active
CFActive
indicates that the blue PiraT2 has recognized the compact flash card
Table 6.1: LED behavior
6.4 External storage
External memory can be used to download trace data from the data logger, to update firmware
and licenses or install a configuration. It can be used to download a bug report too.
The
blue PiraT2
offers additional the possibility to store data parallel to a removable media as
SD card or USB device. The configuration of the feature
[Logging to External Storage]
is de-
scribed in the Telemotive System Client user guide.
6.4.1 Compact Flash card (CF)
The CF card has to be formatted in the FAT32 file format. The card reader supports Compact
Flash 4.1 (CF UDMA Modes 0-4, CF PIO Modes 0-6).
We recommend using the “SanDisk Extreme 16 GB CompactFlash” or the “STEC
SLCF8GM2PUI Com
pactFlash”. For these are fully suitable for automotive requirements.
Please note:
Datalogger with HW 1.x:
Insert the CF card with the label facing down in the CompactFlash Slot.
Datalogger with HW 2.x:
Insert the CF card with the label facing up in the CompactFlash Slot.
The usage is described in chapter
