Telemotive blue PiraT2/5E, User Manual

Page: 59 / 71

blue PiraT2 / 5E / 5E
User Guide
Datum: 21.09.2016
Seite 59 von 71
blue_PiraT2_UserManual_V2.4.1.doc
14.3 Serial connector (D-Sub 26)
The 26-pin-D-Sub-connector combines RS232 digital and analog interfaces.
Table 14.7: D-Sub 26pin
Table 14.8: Pin assignment of the Digital/Analog connector
Index
Name Type Manufacturer-Nr. Manufacturer
DSUB 26pin Connector HD 26F (Reichelt)
Shell 1-1478762-5 Tyco
@ Logger
comment / depiction / signal name
@ Vehicle Interface
D-SUB
26pin
Signal Type Pin
1 RS232_TOUT_1 RS232 #1 Tx DSUB-9 / male 3
2 RS232_ROUT_1 RS232 #1 Rx DSUB-9 / male 2
3 RS232_TOUT_2 RS232 #2 Tx DSUB-9 / male 3
4 RS232_ROUT_2 RS232 #2 Rx DSUB-9 / male 2
5 NA Not connected ---------------------- ----
6 NA Not connected ---------------------- ----
7 NA Not connected ---------------------- ----
8 NA Not connected ---------------------- ----
9 NA Not connected ---------------------- ----
10 RS232_TOUT_3 RS232 #3 Tx DSUB-9 / male 3
11 RS232_ROUT_3 RS232 #3 Rx DSUB-9 / male 2
12 RS232_TOUT_4 RS232 #4 Tx DSUB-9 / male 3
13 RS232_ROUT_4 RS232 #4 Rx DSUB-9 / male 2
14 NA Not connected ---------------------- ----
15 NA Not connected ---------------------- ----
16 TT_CASCADE_CON NA (rfu) ---------------------- ----
17 NA Not connected ---------------------- ----
18 ANA_IN_GND_2
Please connect ANA_IN_GND_2 to KL
31
banana plug yellow
----
19 RS232_TOUT_5 RS232 #5 Tx DSUB-9 / male 3
20 RS232_ROUT_5 RS232 #5 Rx DSUB-9 / male 2
21 RS232_TOUT_6 RS232 #6 Tx DSUB-9 / male 3
22 RS232_ROUT_6 RS232 #6 Rx DSUB-9 / male 2
23 SYNC_CASCADE_CON NA (rfu) ---------------------- ----
24 DIG_IN_1
Digital IN #01 is referenced to KL 31
with internal Pull down, Threshold 9,2 ±
0,1 Volts,
Hysteresis 0,4 ± 0,1 Volt
DIG_IN_1 might be used as a Marker
(with a push-button to positive Supply
Voltage KL 30)
banana jack green ----
25 NA Not connected ---------------------- ----
26 ANA_INSGNL_2 Analog Interface #02 SIGNAL IN banana plug yellow ----