Remote Control Touch
User Guide
Datum: 08.12.2015
Seite 7 von 61
RCTouch_UserGuide_V2.1.1.doc
4
System requirements
Control Unit
A Laptop or a PC is used to configure the devices by a software client. It also allows to save the
recorded data and to use them offline.
blue PiraT2 / blue PiraT Mini
The
blue PiraT Mini
is the newest and very small datalogger which was developed by Telemo-
tive AG. The
blue PiraT2
is his preceding model with enhanced features.
The communication of bus systems and control units are monitored and relevant data can be
recorded very precisely with the data loggers of the Telemotive AG. The collected data are
stored on the data logger and can be downloaded via Ethernet and, e.g., analyzed on a test
computer.
Telemotive System Client
The software client for the blue PiraT2, blue PiraT2 5E and blue PiraT Mini, the
TSL
client
(
T
elemotive
S
ystem
L
ink), is needed to configure the data logger and later to download or con-
vert the recorded data.
Further applicable manuals
Beside this user guide the Telemotive AG offers the main manuals for the client as well as for
the different data logger generations in its ServiceCenter at
https://sc.telemotive.de/bluepirat
User manual for the Telemotive System Client
https://sc.telemotive.de/4/uploads/media/TelemotiveSystemClient_UserManual.pdf
User manual for blue PiraT2 / blue PiraT2 5E
https://www.telemotive.de/4/uploads/media/blue_PiraT2_UserManual.pdf
User manual for blue PiraT Mini
https://www.telemotive.de/4/uploads/media/blue_PiraT_Mini_UserManual.pdf
Licensed enhancements have own manuals which are stored in the ServiceCenter too. You will
find a list of these enhancements in the user manuals in the chapter
Additional features by
optional licenses
.
