Remote Control Touch
User Guide
Datum: 08.12.2015
Seite 49 von 61
RCTouch_UserGuide_V2.1.1.doc
Figure 9.5: Expanding trigger folder
Note:
Triggers are configured per device. Events only trigger actions on the source device.
TSL-wide events are not supported.
Double-click on
[Add Trigger
… (…)]
.
New trigger is generated and displayed in the configuration tree (e.g., Trigger #1).
The window <Trigger> opens.
Note:
If the trigger configuration is not complete, this is indicated by a red symbol with excla-
mation mark at the trigger in the configuration tree and at the affected areas in the win-
dow <Trigger>.
Figure 9.6: Notice message for missing settings
Enable the checkbox
Trigger active
.
Select the desired <Trigger Mode>.
Enter a name for the trigger in the <Name> field.
